![]() ![]() This can be used as a tension tool to jiggle the pins. This will allow you to use the tension tool as a slight force. Step 6 To make the tension tool work properly, turn it in the lock direction. This will allow the tension tool to be inserted into the bottom of your keyhole. The tension tool can be easily inserted into the bottom hole. This will allow you to give it a proper handle. Step 4 – In order to make this a pick tool, you’ll need to angle it at 45 degrees. You can then fold the clip’s tip and use the device. You will need to bend the other half of the clip to a 90 degree angle. Step 3 From this device, you will need to make a tension tool. You can now pinch it in quarter inch lengths and fold it over. Step 2 You will need to make sure it is at least half an inch long so you can pick the lock. This can be done by making the paperclip straight or cutting the straight end. Step 1 First, you must straighten the paperclip. Now you can turn the lock in the opposite direction and it will open immediately. The lock will automatically open when you hear a click. Step 3 Now, you can open the file in a correct direction. You will need to move the file to pick the lock. This is a simple way to get rid of the lock. Step 1 A tiny nail file placed inside the keyhole can do wonders for the lock. The safe will easily open due to the reactive ends. Step 5 Now you can hold on to the handle and turn the magnet. This will enable you to exert the greatest gravitational pull force. ![]() You will need to hold the magnet in a proper position by keeping it on the safe side. Step 4 – This is about putting the magnet in the right place. You can place the magnet in a sock before you attach it to the metal surface. Step 3 Now prepare the magnet to be pulled. This will enable you to pull the door open with a powerful force. Step 2 Next, you need to get a good grip on the metal. ![]() This will enable you to unlock the sentry safe with no keys. This magnet should have a pull force greater than 57kg. It should have a strong and general pull force. Step 1 : You will need a rare earth magnet to start the process. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |